cm) seam across the pinned edge. Backstitch* at each end.
b. Turn the pocket panels Right side out and press along the top edge.
c. Topstitch* ¼″ (0.6 cm) from the top edge. Backstitch at each end.
d. Match the sides and bottom edges. Pin and then machine baste* a ¼″ (0.6 cm) seam down both sides and across the bottom of the pocket panels to hold them in place.
e. Place the pocket onto the Right side of one of the exterior main panels, matching the sides and bottom edges. Pin and then machine baste a ¼ (0.6 cm) seam to hold the pocket in place.
5 ATTACH THE SIDE PANELS TO THE MAIN PANELS.
a. Place one main and one side panel Right sides together, matching the long side edges. Make sure to place the wide end of the side panel at the bottom edge of the main panel. Pin along the edge. Stitch a ½″ (1.3 cm) seam down the pinned edges, beginning at the top and stopping ½″ (1.3 cm) from the bottom edge. Backstitch at each end.
b. Repeat step 5a to attach the second side panel to the opposite side of the main panel.
c. Repeat steps 5a and 5b to attach the second main panel to the opposite long edges of the side panels.
d. Press all seam allowances* open.
6 ATTACH THE BOTTOM PANEL.
a. Place one long edge of the exterior bottom panel and the bottom edge of one main panel Right sides together, matching the raw edges. Pin along the edge.
b. Stitch a ½″ (1.3 cm) seam along the pinned edge, starting and stopping ½″ (1.3 cm) from each end of the bottom panel. Backstitch at each end.
c. Repeat steps 6a and 6b to attach the second main panel to the other long edge of the bottom panel.
d. Turn the bag at the bottom corners. With Right sides together, match the bottom edge of the first side panel to the first short end of the bottom panel. Pin it in place.
e. Stitch a ½″ (1.3 cm) seam along the pinned edges, starting and stopping ½″ (1.3 cm) from each end of the bottom panel. Backstitch at each end.
f. Repeat steps 6d and 6e to attach the bottom edge of the second side panel to the other short end of the bottom panel.
g. Trim* the corners in the seam allowances, making sure not to clip the stitching.
h. Turn the exterior of the bag Right side out. Use your turning tool* to gently push out the corners, and press.
Figure 1
7 MAKE THE REVERSIBLE SIDE OF THE EVERYDAY SHOPPER.
Repeat steps 4 through 6 to make the reversible side of the bag, leaving it Wrong side out.
8 MAKE AND ATTACH THE HANDLES TO THE EXTERIOR.
a. Fold the first handle in half lengthwise, Wrong sides together, and press a crease along the folded edge.
b. Open the handle. Fold each long edge in to meet the center crease, and press. Tuck the fleece handle insert, fusible side facing down, under one of the folded edges.
c. Fold the handle in half again at the center crease to enclose the raw edges. Pin. Topstitch a ¼″ (0.6 cm) seam along each folded side. Backstitch at each end. Press to fuse the fleece in place.
d. Find the center of the handle by folding it in half, matching the short raw ends. Press along the folded edge to mark the center, and open the handle. Measure and mark 1½″ (3.8 cm) on each side of the center crease.
e. Fold the handle between the two marks, matching the long folded edges, and pin in place.
Figure 2
f. Stitch, following the original topstitching line between the two marks. Backstitch at each end. Note: You will be stitching through all layers of the handle, creating a 3″ (7.6 cm) area that is narrower than the rest of the handle .
g. Repeat steps 8a through 8f to make the second handle.
Mark the handle placement.
h. On the first exterior main panel, using a ruler and fabric marker, measure along the top edge, and mark 1½″ (3.8 cm) in from each of the side seams. Repeat for the second exterior main panel.
i. Place one short end of the first handle on the Right side of the first exterior main panel with the outside edge of the handle to the inside of one of the marks. Match the ends of the